PRELEG WIRE # 105302 (30 GAUGE GREEN TYPE # 1 COATING UL SPEC)

TYPE # 1 Green 30 awg UL 1371 250 ft roll

Silver Plated Copper 30 AWG Hook-up Wire

A Teflon®-insulated copper wire that is coated with a high-temperature adhesive layer. The adhesive layer is heated with the melting iron (a type of soldering iron), ie by moving the melting tip over the wire, the wire adheres to the desired length on the printed circuit board. In this way, exact and straight wiring bridges are achieved. Since the adhesive layer does not stick at temperatures between -55°C and +125°C, the wire can be handled without any problems. If necessary, the bonded wire can easily be removed from the printed circuit board without damaging it. Preleg Wire® is a registered trademark of Preleg Inc.

WIRE IS A PTFE TEFLON® COATED, SINGLE CONDUCTOR WIRE IAW UL-1371

WIRE FEATURES AN ADHESIVE COATING WITH THE FOLLOWING CHARACTERISTICS:

COATING: THERMOPLASTIC POLYAMID RESIN

MELTING POINT: 392°F (200'C)

SERVICE TEMPERATURE RANGE -55'C TO +125'C

RECOMMENDED FOR APPLICATIONS BEFORE WAVE SOLDERING WITH AQUEOUS CLEANING SYSTEMS AND NO CLEAN SOLDERING PRODUCTS OR POST-WAVE CHANGES LOW CHEMICAL RESISTANCE